Hellwig Sway Bar 7717 User Manual

Browse online or download User Manual for For the car Hellwig Sway Bar 7717. Hellwig Sway Bar 7717 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 5
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
7717 (R-7717) 05/26/2011
TORQUE TABLE
Bolt Size 3/8”— 35 ft lbs * Bolt Size 7/16”— 45 ft lbs* Bolt Size 1/2”—75 ft lbs *Bolt Size 9/16”— 90 ft lbs
SAFETY: BEFORE BEGINNING INSTALLATION BE SURE TO SET THE PARKING BRAKE
AND CHOCK THE WHEELS.
NOTE: TO EASE INSTALLATION AND PROPERLY ADJUST THE BAR, THE WEIGHT OF THE
VEHICLE MUST BE ON THE SUSPENSION AS IF DRIVING DOWN THE ROAD. DO NOT RAISE
THE VEHICLE BY THE FRAME.
NOTE: THIS UNIT IS DESIGNED TO MOUNT TO THE BOTTOM OF THE AXLE TUBES WITH
THE ARMS OF THE BAR TOWARD THE REAR OF THE VEHICLE.
INSTALLATION INSTRUCTIONS
Rear Stabilizer Bar 7717
2011+ GM 2500HD-3500HD 2WD-4WD
Duramax Diesel Only
Thank you for purchasing a quality Hellwig Product.
PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION
559-734-7451 800-367-5480 FAX 559-734-7460
Page view 0
1 2 3 4 5

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

7717 (R-7717) 05/26/2011TORQUE TABLEBolt Size 3/8”— 35 ft lbs * Bolt Size 7/16”— 45 ft lbs* Bolt Size 1/2”—75 ft lbs *Bolt Size 9/16”— 90 ft lbsSAFETY

Page 2 - End LinkAssembly

559-734-7451 800-367-5480 FAX 559-734-7460Insert threaded plate with pigtailthrough this holeThreaded plate will beinserted into large holein frame ra

Page 3

1. Locate large slotted hole in side of frame rails approximately12 forward of the bump stops as shown in photo 1.2. Insert threaded plate into large

Page 4 - 7717 (R-7717) 05/26/2011

7. Lubricate and install polyurethane D-bushings and U-plates on the sway bar in the loca-tions shown in photos 4&5.8. Orient sway bar with arms a

Page 5 - AND THE WARRANTY FORM

12. After all adjustments have been made, tighten end link mounting bolts to 35-40 ft-lb and 9/16” ad-justment nut on end links to 70 ft-lb.13. Bounce

Comments to this Manuals

No comments