Hellwig Sway Bar 55903 User Manual download pdf

TORQUE TABLE

BOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs.

SAFETY: BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND

CHOCK TIRES.

NOTE: TO EASE INSTALLATION AND TO PROPERLY ADJUST THE SWAY BAR, THE WEIGHT

OF THE VEHICLE MUST BE ON THE SUSPENSION AS IF DRIVING DOWN THE ROAD.

DO NOT RAISE THE VEHICLE BY THE FRAME.

NOTE: THIS UNIT IS DESIGNED AS A REPLACEMENT FOR THE FACTORY INSTALLED FRONT

ANTI-SWAY BAR OR AS AN ADDITION IF NOT EQUIPPED.

NOTE: THIS KIT INCLUDES LOCK NUTS WHICH REQUIRE TIGHTENING WITH A WRENCH

AFTER BEING STARTED BY HAND.

INSTALLATION INSTRUCTIONS

FRONT STABILIZER BAR

1964-69 B-Body Mopar

Thank you for purchasing a quality Hellwig Product.

PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION

5903 ( R-5903 ) 04/09/2007

559-734-7451 800-367-5480 FAX 559-734-7460

1 2 3

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

TORQUE TABLEBOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs.SAFETY: BEFORE STARTING YOUR INSTA

Page 2 - 5903 ( R-5903 ) 04/09/2007

559-734-7451 800-367-5480 FAX 559-734-74601. If equipped, remove the factory installed anti sway bar and the mounting hardware.2. Locate holes in K-me

Page 3

5. Assemble end links as shown in the diagram and photos (5) & (6). Tighten nut until end links bulgeslightly.6. Center sway bar in bushings and a

Related models: Sway Bar 5903 | Sway Bar 5909 |

Comments to this Manuals

No comments

Hellwig Sway Bar 55903 User Manual

Browse online or download User Manual for For the car Hellwig Sway Bar 55903. Hellwig Sway Bar 55903 User Manual

Summary of Contents

Related models: Sway Bar 5903 | Sway Bar 5909 |

Comments to this Manuals

Related products and manuals for For the car Hellwig Sway Bar 55903