Hellwig Sway Bar 7642 User Manual download pdf

TORQUE TABLE

BOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs.

SAFETY: BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND CHOCK TIRES.

NOTE: TO EASE INSTALLATION AND TO PROPERLY ADJUST BAR, THE WEIGHT OF THE VEHICLE MUST BE

ON THE SUSPENSION, AS IF DRIVING DOWN THE ROAD. DO NOT RAISE VEHICLE BY FRAME.

NOTE: THIS KIT INCLUDES LOCK NUTS WHICH REQUIRE TIGHTENING WITH A WRENCH AFTER BEING STARTED

BY HAND.

559-734-7451 800-367-5480 FAX 559-734-7460

INSTALLATION INSTRUCTIONS

7642 Rear Stabilizer Bar

Ford E-150 Van

Thank you for purchasing a quality Hellwig Product.

PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION

7642 (R-7642)

02/06/2007

1 2 3

TORQUE TABLE BOLT SIZE: 3/8” = 20-30 ft. lbs. – 7/16” = 35-45 ft. lbs. – ½” = 50-70 ft. lbs. – 9/16” = 70-90 ft. lbs. SA

Page 2

1. Place U-bolts over the axle tubes as shown in photos (2) and (3). 2. Lubricate D-bushings and place on flat areas of the bar to line up with th

Page 3

5. Attach angle bracket to frame rail by locating the welded bolt/plate assembly on the inside of frame rail and attaching angle bracket using 1/2” l

No comments

Hellwig Sway Bar 7642 User Manual